A mudroom bench with storage works when it’s planned around the door first, then the wall behind it, then the floor and heat beneath it. A mudroom is the entry room where coats and boots land. Get that order right, and the rest of the design has room to work.

The order matters for plain reasons. The code sets a clear width and a landing at the exterior door your home counts on as its exit. A bench and cubbies sized from a picture can crowd that door. That can mean recut cabinets or a failed inspection. Hooks need something solid behind them. And the bench base and floor take the wet boots, every day.

What Should a Mudroom Bench With Storage Leave Free at the Door?

It should leave the door’s full opening free, plus the floor in front of it. The bench and cubbies sit beside the door, never in its path. The door has to swing all the way open with the storage in place. If it can’t, the plan isn’t finished yet.

Under the exterior door rules in the residential code Pennsylvania uses, the required exit door must give a clear width of not less than 32 inches, measured with the door open 90 degrees. The code also calls for “a landing or floor on each side of each exterior door.” Each landing must be at least as wide as the door it serves.

It must also reach at least 36 inches in the direction of travel. Your township’s building official enforces these rules.

The 32-inch clear width applies to the door your home counts on as its required exit. That may be this door, or it may be another one. The landing rule applies at every exterior door. Either way, a bench that crowds a door your family uses every day is a plan error. So measure with the door open before the cabinet plan is set. Include the handle side in that check, along with any storm or screen door.

Think about the moment someone comes in with full arms. They need to step in, swing the door shut and set things down. If the end of the bench sits where that first step lands, the entry will feel tight on every trip. That’s true even if it meets the code.

Where Do the Cubbies, Hooks and Bench Seat Go?

They go where each person stops, sits and hangs things. So the plan starts with who uses the entry and what they carry, not with a picture. A family that comes in from the garage with sports bags may need a different layout from one that comes in from the yard with a dog.

Before anyone draws a cubby, it helps to settle these on paper:

  • Who uses the entry, and how many people come in at once.
  • The longest coat and the tallest boot that need a spot.
  • Where bags and wet umbrellas land.
  • Whether kids and adults need hooks at different heights.
  • Whether wet and dry things get open storage or closed doors.

Those answers shape the layout. A spot to sit and pull off boots belongs where people stop first. Everyday coats can hang within reach of the bench. Things you use less can sit higher up or farther from the door.

If the mudroom is one room among several, you can plan it as part of a multi-space remodel with Lang’s designers. Our multi-space remodels can include other rooms, like a new laundry room, mudroom, primary closet, butler’s pantry or foyer. A multi-space remodel also lets you take a more strategic approach to your home’s layout and storage.

What Does the Wall Behind the Hooks Have to Hold?

It may have to hold more than a plain finished wall. Loaded hooks and shelves pull on it every day, and a bench back can add to that. So solid backing belongs on the plan while the wall is still open. Ask your designer to mark where it goes before the walls close.

Think about the load on a wet day. A soaked coat weighs more than a dry one. A school bag full of books pulls harder than a scarf. Hooks you picture holding one jacket may end up holding a stack of them.

The wall may carry wires, too. Charging outlets and a light over the bench change the wiring. So does moving a switch. Those choices affect where the hooks and cubbies can sit, so they belong on the same plan.

We’ve written about which changes need a permit in Bucks County. Moving the plumbing, adding electrical or taking down a wall brings a permit and an inspection from your township. Worst case, hidden work found later can force finished walls open to prove it was done right. New outlets or lights in the mudroom likely belong in that same conversation with the township.

What Do the Bench Base and Floor Take From Wet Boots?

They take water and grit, and in winter they take salt as well. The floor in front of the bench and the base under the seat see wet boots every day. Finishes that can handle water can make a difference here. So does a base that can dry out between uses.

Ask what happens when a boot drips. Open space under the seat lets air reach wet boots. Closed doors hide the clutter, but they can also hold damp air in. Your designer can help you weigh which parts of the base stay open.

Heat belongs on the same plan. A floor register or baseboard heater can end up behind a bench or a locker. So can a return. If that happens, the room may stay cold and the boots may stay wet. That’s why it helps to settle where the heat sits before the cabinets are ordered.

Our guide to how a laundry room is planned as four systems notes that a laundry often lands next to a mudroom off the garage, because the plumbing is already there. When the two rooms share a wall, the laundry’s duct and doors belong on the same plan as the bench.

When Should You Plan the Mudroom in a Remodel?

Start while the remodel is still on paper, before the cabinets are ordered and well before the walls close. Lang’s designers visit the jobsite for a complete in-home analysis. Then our design team finalizes all dimensions, floor plans and mechanical specifications. Your door and wall questions belong on that plan, and so do the heat registers.

Timing matters here. Once cabinets are ordered, a change at the door can mean recutting them.

For a first design consultation, it can help to bring:

  • Photos of the entry and the exterior door.
  • The direction the door swings.
  • Where the heat registers sit.
  • A note on what the family carries in and out.
  • Any laundry or garage door beside the entry.

Frequently Asked Questions About Mudroom Benches

What is a mudroom?

A mudroom is the entry room where coats and boots land. It can sit at a back or side door, or by the garage. It can be its own room or a stretch of wall by the door. Either way, it works when the door and the wall are planned together with the floor beneath them. That way, the storage fits how your family comes and goes.

Should a mudroom bench be open or closed?

It depends on what goes under it. Wet boots need air to dry, so open space under the seat can help. Bags and sports gear may want closed doors. You can mix the two, with open space for wet things and doors for dry ones. Settle which goes where before the cabinets are ordered.

Can a mudroom bench block the door?

It can. The residential code sets a clear width at the exterior door a home counts on as its exit: not less than 32 inches, measured with the door open 90 degrees. The code also calls for a landing or floor on each side. It must be at least as wide as the door and at least 36 inches in the direction of travel. Measure with the door open before the cabinet plan is set.

Do hooks need special backing in the wall?

They may. Loaded hooks and shelves pull on a wall every day, and a wet coat or full backpack adds weight. Solid backing can be planned while the wall is open. Adding it later can mean opening a finished wall. Ask your designer where the hooks will go, and have that marked on the plan before the walls close.

Who can help plan a mudroom in a remodel?

Lang’s design team can. Design consultations are available in our showroom and online, by appointment. Our multi-space remodels can include a mudroom alongside other rooms. In our process, designers visit the jobsite for a complete in-home analysis. Then the design team finalizes all dimensions, floor plans and mechanical specifications.

Bring Your Entry to a Design Consultation

In Lang’s 12-step remodeling process, designers visit the jobsite for a complete in-home analysis before the design team finalizes all dimensions, floor plans and mechanical specifications.

Clearance at the door and backing in the wall can be settled while the plan is still on paper, and so can the heat. So it helps to bring photos of the entry and the door to the first meeting.

We follow a specifically designed process for renovation, and you can read through Lang’s 12-step remodeling process from the first steps to the final floor plan.

If you’re planning a mudroom bench with storage, talk with Lang’s design team in our Newtown showroom or online, by appointment.